-
Email Us:
thomas@beardedplumber.com -
Email Us:
thomas@beardedplumber.com Your water heater quits at the worst times – right before you need to get the kids ready for school or when you’ve got a house full of guests. The good news is that most water heater problems can be fixed the same day if you catch them early. We’ve been doing water heater repairs in Riverview, FL, for years, and we’ve seen every problem you can imagine.
Living here in Riverview means dealing with hard water that causes sediment buildup. That sediment is probably the reason your water heater is making noise or not heating like it used to. The minerals in our water are tough on water heaters, especially in neighborhoods like Winthrop and Waterset, where the water quality is particularly hard.
Most water heater problems show warning signs before they get really bad. Maybe your showers aren’t as hot. Maybe you hear popping or rumbling sounds.
Maybe you see a little puddle forming around the base. These are all things we can fix if you call us early enough.
The most common water heater repair we do is replacing heating elements. When one element goes bad, you’ll notice you run out of hot water way faster than normal. This is a pretty simple fix that takes about an hour and costs way less than getting a replacement water heater. We carry heating elements on our trucks, so we can usually fix it the same day you call.
Leaking pressure relief valves are another big one. That valve is there for safety – it releases pressure if things get too hot inside the tank. When it starts dripping, you need to get it fixed.
If you ignore it, you could end up with a bigger leak or even a tank failure. We can repair water heater valves in about 30 minutes.
Thermostat problems are tricky because they act like other issues. Your water might be too hot, too cold, or the temperature keeps changing. We test the thermostats and replace them if they’re faulty. Both upper and lower thermostats can go bad, and sometimes it’s both at once.
Sediment buildup is huge here in Riverview. All that mineral-filled water leaves deposits at the bottom of your tank. Over time, it makes your water heater work harder, makes weird noises, and eventually causes the tank to fail early. Regular water heater maintenance includes flushing out that sediment before it becomes a problem.
Sometimes repair isn’t the right answer. If your water heater is over 10 years old and is having problems, or if the tank itself is leaking, you need a replacement water heater. We’re honest about when repair makes sense and when it doesn’t. There’s no point spending $300 on repairs for a 12-year-old tank that’s gonna fail in six months anyway.
When you need to change water heater units, we make it easy. We handle everything – permits, hauling away the old tank, installing the new one to code, and testing it before we leave. Most replacements take 3-4 hours total. We stock common sizes on our trucks, so there’s a good chance we can do it the same day.
Newer water heaters are way more efficient than old ones. You’ll notice lower electric bills right away. Plus, they have better warranties, usually 6-12 years, depending on the model. If your current water heater is ancient and you’re always having to repair it, replacement saves you money in the long run.
New water heater installation is what we do when you’re building an addition, upgrading to a bigger tank, or switching from tank to tankless. This is different than replacement because sometimes we need to run new plumbing or electrical.
Tankless water heaters are getting really popular in Riverview. They never run out of hot water, they last 15-20 years, and they save space. The upfront cost is higher than a regular tank, but you save money on utilities every month. We install both types – traditional tanks and tankless – whatever makes sense for your home and budget.
Picking the right size matters a lot. Too small and you run out of hot water. Too big and you’re wasting energy heating water you don’t need.
We look at your household size, how many bathrooms you have, and your usage patterns to figure out the perfect size. For most Riverview homes, a 50-gallon tank works great for 2-3 people.
We service all of Riverview: FishHawk Ranch, Waterset, Winthrop, Summerfield, Panther Trace, Boyette Springs, and everywhere else. We also cover nearby areas like Brandon, Valrico, and parts of Tampa. If you’re in the area and need water heater service, we can help.
Our trucks are stocked with the most common parts – heating elements, thermostats, pressure relief valves, anode rods, and more. We also carry a few water heaters in common sizes. This means we can fix most problems without having to come back later for parts.
All our plumbers are licensed and background checked. We show up on time, we give you straight answers, and we clean up after ourselves. We’ve been serving Riverview for years, and we’ve built our reputation on doing good work at fair prices.
Most water heater repairs in Riverview cost between $150 and $500, depending on what’s wrong. Simple fixes like replacing a heating element or thermostat run $150-$250.
Pressure relief valve replacement is around $150-$200. More complex water heater repairs, like fixing gas control valves or multiple issues at once, can cost $300-$500. We always give you a price before we start work, so there are no surprises.
Most water heater repairs take 1-2 hours from start to finish. Simple stuff like replacing a heating element or thermostat takes about an hour.
More involved repairs might take 2-3 hours. If we need to flush your tank to remove sediment buildup, that adds another hour. We try to get you back up and running as quickly as possible because we know your family needs hot water.
If your water heater is less than 8 years old and the repair is under $300, the repair usually makes sense. If it’s over 10 years old or if the tank is leaking, replacement is smarter. Also, if you’ve had to repair it multiple times in the last year, that’s a sign it’s time for a new one. We’ll always be honest with you about which option makes more sense for your situation.
That banging or popping sound is usually sediment buildup at the bottom of your tank. The minerals in Riverview’s hard water settle at the bottom, and when the water heats up, it has to push through that sediment layer. This causes the noise.
Flushing your tank removes the sediment and stops the noise. If you ignore it, the sediment can damage your tank and shorten its life.
Yes, we offer same-day water heater repair in Riverview in most cases. If you call us in the morning, we can usually get to you that afternoon. We keep common parts stocked on our trucks so we don’t have to order things and come back later. Even for emergency calls at night or on weekends, we do our best to get you fixed up quickly.
Yes, water heater maintenance is one of the best things you can do to extend your tank’s life. We recommend annual maintenance that includes flushing the tank, checking the anode rod, testing the pressure relief valve, and inspecting all the components. Regular maintenance can add 2-3 years to your water heater’s life, which is a big deal here in Riverview, where hard water is tough on tanks.